CGN3ACSMR bridge issue

[fengjun326]

hi rogers

i always set my CGN3ACSMR gateway to bridge.

but recently i found out when i set it to bridge mode, the 2.4G light will be ON automatically.

i remember those 5G and 2.4G light should be off , when i set the gateway to bridge mode.

so is there anyway i can fix this?

[fengjun326]

hi rogers

i always set my CGN3ACSMR gateway to bridge.

but recently i found out when i set it to bridge mode, the 2.4G light will be ON automatically.

i remember those 5G and 2.4G light should be off , when i set the gateway to bridge mode.

so is there anyway i can fix this?

[Datalink]

For now:  the current work-around is to disable 2.4. Ghz Wi-fi before bridging  the modem if you wanted to get rid of the light.

[fengjun326]

same thing.
i reset the modem, disable both 5G and 2.4G wifi .before i bridge it.
but the 2.4G light still ON, when its bridge mode.

[Gdkitty]

Do you actually SEE the SSIDs for them when you look at local wireless networks??

May just be a firmware bug in the light displays.

[fengjun326]

i didnt see both 5g and 2.4g ssid.

but the 2.4g light was on. so weird

[RogersAsif]

Hello @fengjun326

To my knowledge the work-around is supposed get rid of the light. Just to confirm, you ensured your pressed save and the light was off before bridging the modem?

@DavePC I know you were experiencing the same issue, did the work around work for you?

RogersAsif

[fengjun326]

@RogersAsifim sure i did press the save button b4 i bridge it.

[RogersAsif]

Thanks for letting me know @fengjun326

So i assume the light was off before bridge mode then after, it was on?

RogersAsif

[fengjun326]

@RogersAsif

yes.

i was turn off both 5g and 2.4g wifi before i set the modem to bridge mode.

[RogersAsif]

Thanks.

I will have a further look into this. Apologies for the inconvience.

RogersAsif