voice stopped working tonight. Is a server down? Will try our other TV
Voice remote is definitely my favourite feature of the remote! I wasn't able to replicate the issue on my end. Did you try the feature on the second TV? Did it work for you?
Any one else in the Community experiencing this issue?
Voice recognition not working. When I press the microphone button on remote, it says not working now try later. Then it goes into teaching mode and says "press and hold" say CNN or record" etc etc. Its been two days now and still the same. I have rebooted and changed the batteries, but still wont work. It is working on my other tv. I have only had ignite for 2 weeks so remote is new. Can anyone help. Thanks
Thanks for sharing your concern with the rest of the Rogers Community!
I also have Ignite TV at home and the voice remote is my absolute favourite feature!! I would be pretty frustrated if it conked out on me. 😒
It sounds like you've taken all of the right steps to troubleshoot the problem, to no avail. I ran some tests on my 3 TV's and am not personally noticing anything wrong, plus you mentioned that your other Ignite remote seems to be working fine. I also checked for any reported issues and could not find anything specific to your concern.
In this case, the issue may be with your remote control being faulty. A quick swap at your nearest Rogers branded location will probably do the trick! Can you please give this a try and provide us with an update once done?
Hi To All:
I just replaced the batteries in the remote. All functions that we use on a regular basis seem to be working except for the "voice remote" function. We're getting 5 green lights so there is a full battery charge. Any thoughts?
@CJS1 If you just press the Microphone button briefly (without saying anything) does the set-top box respond with "Sorry, I didn't get that." or ask you to "Press and hold to try again.", or do you get a different error?
From time to time, when using voice commands, I get an error that the service is unavailable... but works when I try again a few seconds later.
On one other occasion, voice commands would not work on one set-top box but worked fine on others. I Restarted the stb and all was well again.
This is the same with mine. It works once then not again for several tries, goes to teaching mode yet the remotes on the other two TVs work fine. Hope we can get this sorted out.
We appreciate you joining us here in the Rogers Community Forums and thanks for the post! Hopefully, it will be the first of many to come! 😁
Having to fiddle around with your remote can't be a very fun experience! Normally, when I begin having issues with the voice command option on my Ignite remote, it has to do with the battery power getting low. A simple switch to some new batteries normally does the trick! Otherwise, I would recommend trying a reboot of the Ignite box to see if this helps, as suggested by our Resident Expert @-G-.
Please let the community know how it goes and if you are able to get the issue resolved at your end! 👍
Welcome to the Community @Lucpr,
I find the voice remote super handy! Can you please elaborate a little on what issue are you experiencing? What happens when you press the microphone button?
Just need a little bit more info to assist you further.