06-23-2019
07:35 AM
- last edited on
01-03-2020
02:24 PM
by
RogersLaura
Just upgraded & the installer could not get the remote set up to control my tvs (rca-roku) I did some research & found you can program them using setup-991-channel up method. Now works fine, but on rca you have to go into tv settings and enable “fast start” so the remote will turn it on. Spread the word
*Added Labels*
06-23-2019
11:17 AM
- last edited on
01-03-2020
02:25 PM
by
RogersLaura
Hello, @Cam957.
Welcome to the Rogers Community Forums! 😁
Thank you so much for sharing programming of your TVs using Voice Remote of Ignite TV. The tip of enabling the fast start in TV settings can help others in a similar situation.
Thanks for your contribution and for your help in keeping the community a pleasant place to be.
Cheers,
RogersMoin
11-29-2019
03:03 PM
- last edited on
01-03-2020
02:25 PM
by
RogersLaura
This method worked for the RCA Roku. A+D, then 991, then channel up until the TV powers off. Then press the OK button on the remote to lock it in. You need to press the OK button before the remote times out with a double blink.
12-17-2019
04:27 PM
- last edited on
01-03-2020
02:25 PM
by
RogersLaura
So i've noticed quite a few posts about not being able to code an xr15 Ignite TV remote to an RCA TV. I had the same issue. Tried all the RCA codes and none worked. I did some homework and found out RCA is made by a number of companies including Voxx International, Curtis International, AVC Multimedia, TCL Corporation, and Express LUCK International, but the code that actually worked for me was for GE which was the original owner of RCA. The GE codes I tried were one of the following. Hope this helps get your remote working on your RCA tv!
11447, 10047, 11347, 10451, 10051, 10178, 10765, 12360.
01-03-2020
02:04 PM
- last edited on
01-03-2020
02:27 PM
by
RogersLaura
Can't Control RCA TV Model rhos581sm w/ Voice Remote
The codes offered by the remote setup function do not work. On the urcsupport.com site, the model number does not give me a code to use. I just bought this TV, so it's certainly not obsolete. Any suggestions?
01-03-2020 02:30 PM
@scouternorm Which model remote are you using (11 or 15)? Did you try simply entering RCA and indicating "I don't know the model"? This gave a number of options - have you tried those options? Did you see the numbers in the post above yours? Your post may have been moved to this existing thread - check out earlier posts.
01-03-2020 02:58 PM
I got my mother in law a RCA recently for xmas. Lower end unit.
The URCsupport did not have the specific model listed in there.
So as 57 said, I just entered RCA. It gave one primary code, but then also listed like 20+ additional codes.
We had to go through about 6 of them, until it found one that worked.
01-04-2020
05:56 PM
- last edited on
01-05-2020
01:05 PM
by
RogersMoin
That worked for me too. Thanks 57! I entered RCA and indicating "I don't know the model"? This gave a number of options . I went to the bottom & the 5th one I tried worked. Thanks!
Solved! Pair Ignite X15 Voice remote with RCA mod# RHOS581SM
Went to https://www.urcsupport.com/urc_product/xfinity-xr15/##setup and when asked for model of TV, clicked Code Finder, add TV and I just put in RCA and didn't know model number. A whole lot of codes showed up, so I went right to the end, and chose 5 to try. # 10765 did the trick for me!
01-27-2020
05:29 PM
- last edited on
06-19-2020
11:16 AM
by
RogersLaura
The 991 method with channel up work fine without having to set fast start option is roku rca tv setup.
03-06-2020 04:04 PM