Hey guys, I just got this new modem with my Ignite service. Are we able to set custom DNS servers, and does it offer any type of IDS (Intrusion Detection Service)? Is there any tweaks/settings that ya'll recommend for optimal performance?
I love the Broadcom chipset in this thing, my ping and latency seems much better than the unpredictable Hitron it replaced.
That I am aware, you are not able to assign a different DNS with the modem/gateway itself.
Likely would have to go in bridged with your own router. (but that recalls another whole setup then for the TV units.)
I'm also not aware of any way to change the DNS settings on the XB6 itself. However, I can confirm that if you put the XB6 into bridge mode and use your own router, you can configure 3rd-party IPv4 and IPv6 DNS servers and Ignite TV and Netflix still work fine.
Can anyone with Rogers that reads the forums please submit a feature request to allow DNS setting changes on Ignite modems? I use an in-house DNS server (pihole) for ad blocking and privacy, which can't be activated for the entire home network without the ability to change DNS settings. Other Rogers modems allow for these changes, so why not the XB6? It's frustrating to 'upgrade' to Ignite only to have limited settings.
Bridge the VB6 and use your own router. Solved.
@mednorth This question was recently asked at the Ignite TV "Ask an Expert" event: https://communityforums.rogers.com/t5/Ignite-TV/Ask-an-Expert-Ignite-TV-Pt-II/m-p/450947/highlight/t...
I was hoping you guys would allow us to use custom DNS servers on the XB6 like on the previous Hitron Gateway. Is this something that is going to be made available with a future firmware update?
At this time, custom DNS servers aren’t compatible with the Protected Browsing and Parental Control features in Ignite Wi-Fi Hub.
I also don't know how the Xi6 set-top boxes pick up their DNS settings, whether it's through DHCP or if they are provisioned centrally. You'll have to ensure that whatever solution you come up with doesn't break Ignite TV.
So, for anyone who uses the XB6 without a router behind it, what do you see for the DNS addresses if you run an ipconfig/all command using a Windows Command Prompt? Does it point to the modem, or do the actual DNS IP addresses show up? If they do, what are they? The Rogers DNS addresses??
Primary IPV4 DNS: 220.127.116.11
Secondary IPV 4 DNS: 18.104.22.168
Primary IPV6 DNS: 2607:f798:18:10:0:640:7125:5204
Secondary IPV6 DNS: 2607:f798:18:10:0:640:7125:5198
Or, does some other DNS address show up?
What do the parental controls do, simply control the access times for a given device, or is there an additional capability to filter web content? If the controls are only for access time control, I fail to see how that involves the DNS addresses? Router manufacturers seem to be able to control access times with the users choice of DNS addresses, what the problem with the XB6 modems? Is this a Comcast decision or a Rogers decision? If this is all on Comcast, then the probability of changing this situation is most likely slim to none. Of course that just gives Rogers an easy out, "Its all up to Comcast".