reprogram SA3200 remote

Need Help?

That's what we're here for! The goal of the Rogers Community is to help you find answers on everything Rogers. Can't find what you're looking for? Just ask!
cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Highlighted
I Plan to Stick Around
Posts: 14

reprogram SA3200 remote

I set up a new tv on an existing SA3200 box in my house, and now the volume on the STB can not be controlled by the remote, instead it controls the TV volume even tho I pressed CBL on the remote. I've tried the SA remotes from my other SA3200 and SA940. The other SA3200 remote controls the volume (same type as one that doesn't work), but the one from the SA940 doesn't control the volume. How do I reprogram my SA3200 remote (Model ER1 shown here) so that the volume controls (including mute button) work?

 

 

 

***Edited labels***

Solved! Go to Solution.

Accepted Solutions
Highlighted
I'm a Senior Advisor
Posts: 1,299

Re: reprogram SA3200 remote

 

Program for Volume Control

You can program the remote control to control the volume and mute functions
through the Explorer 2000 , or through your TV. The default is through the TV. To
program for volume control:
1. Point the remote control away from the Explorer 2000, the TV, and the
VCR.
2. Press and hold the CBL button and select at the same time until the LED on
the remote control blinks twice.
3. Using the remote control keypad, press the following buttons: 9, 9, and 3.
The LED on the remote blinks twice.
4. Press the TV button and the CBL button, depending on which device you
want to control the volume. The LED on the remote control blinks twice to
confirm a valid selection.
5. Point the remote toward the device on which you chose to control the
volume, and adjust the volume to confirm operation.

 

View solution in original post


All Replies
Highlighted
I'm a Senior Advisor
Posts: 1,299

Re: reprogram SA3200 remote

 

Program for Volume Control

You can program the remote control to control the volume and mute functions
through the Explorer 2000 , or through your TV. The default is through the TV. To
program for volume control:
1. Point the remote control away from the Explorer 2000, the TV, and the
VCR.
2. Press and hold the CBL button and select at the same time until the LED on
the remote control blinks twice.
3. Using the remote control keypad, press the following buttons: 9, 9, and 3.
The LED on the remote blinks twice.
4. Press the TV button and the CBL button, depending on which device you
want to control the volume. The LED on the remote control blinks twice to
confirm a valid selection.
5. Point the remote toward the device on which you chose to control the
volume, and adjust the volume to confirm operation.

 

View solution in original post

Highlighted
I Plan to Stick Around
Posts: 14

Re: reprogram SA3200 remote

thanks that worked.
Highlighted
I'm a Senior Advisor
Posts: 1,299

Re: reprogram SA3200 remote

No problem!
Highlighted
Community Manager (Retired)
Community Manager (Retired)
Posts: 690

Re: reprogram SA3200 remote

Great suggestions as usual Chris, thanks.