I have recently installed Rogers Hi-Speed internet and a Cisco DPC3825.
Since this switch from BELL DSL to Rogers I have been unable to download weekly backups from my off-site linux server using the SCP protocol.
I get an error "Corrupted MAC on input.Disconnecting: Packet corrupt lost connection"
Which really means == "The 'MAC' in this error message actually means 'Message Authentication Code' rather than 'Media Access Control' and a corrupted MAC in SSH means that, as the error message also states, a data packet has either been corrupted in transit possibly done intentionally by an attacker, although much more likely caused by bad hardware (or a bad NIC driver) somewhere in between you and the server. If the hardware and other network equipment check out on both ends, then the SSH packets could also be corrupted in transit by a network provider."
Having checked all my hardware NICs and cables and confirming that the transfer works from locations other than my home, I'm certain the problem is either A) the modem, or B) some other fault in the Rogers network.
Of course the easiest thing to do is go get another modem from Rogers. I understand the local store has 3 modems available, the Cisco, Hitron and SMC modems.
I guess my question is if anyone has any opinion as to whether or not one will be more likely than another to deliver a fix for this issue.
Solved! Solved! Go to Solution.
Just to update.
I went to the store and got another Cisco modem to try.
Worse than before.
Now my connection stalls constantly. Even just surfing pages, every 5 or so requests will stall. The only solution is to stop and reload which works every time.
As for file uploads and downloads of any size over ssh, scp or ftp you can forget that.
Of course tech support can't do anything really, the lady I spoke with yesterday did a factory reset of the modem and as usual everything looks good from her end. I asked her about the other modem choices, she basically told me that they all have issues, take your pick.
I am going to get yet another modem, maybe the 3rd time will be the charm.
Hmm.. i have an FTP set up at home, turn it on when i need to transfer files between work and home, and it DOES work.
I had it set up on the Cisco before, but am now on the SMC and it works there.
Might be worth trying another brand one if you are able to.
The other next thing, would be the usualy standby to fix alot of issue sometimes... is bridged mode.
Changing to bridge mode changes that unit into a modem only, and then use a 3rd party router for firewall, wireless, DHCP, access control, etc.
Thanks will likely try those other solutions (different modem, bridge mode) if the next Cisco doesn't help.
I'll keep updating this until it works, or until I go crawling back to Bell.
Are you using another router in front of the rogers gateway and double NAT'ing?
or have you ever modified any MTU settings on your PC? DSL has different MTU sizes and your PC could be fragmenting the packets causing SSH/SCP to freak out.
No and No.
The Hardware setup (Mavericks) is configured "Automatically"
MTU: Standard (1500)
AVB/EAV Mode ON
I'll I have done is change the DNS servers to 18.104.22.168 and 22.214.171.124
Have you tried turning off SPI (statefull packet inspection) in the firewall settings. I had that gateway once I recall it was much more stable with SPI disabled. It could be mistaking if for one of the many other devices I have used but either way that is a good place to start.
The modem security section has
IPSec Passthrough Enabled
PPTP Passthrough Enabled
SPI Firewall Protection Enabled
All options are off excpet Block Anonymous Internet Requests
I just came back with the CGN3.
So far (I fear typing this) things are good.
I just downloaded 2 backups from my server via SCP. (6 uninterrupted GBs)
Web browsing from my wired connection is consistent.
I can ftp (SFTP) without any issues.
I guess the $4 a month is worth having service that finally works.
Now let's see how the wireless goes . . . I'm being told by the gamer in the house that it's not great. I'll check out the other threads about that.