we would like to provide you with help and troubleshooting ideas. However, you have not given us enough information to understand the setup your are using with your security cameras.
For example, what do you mean by "...ip keeps stopping...". From the title of your posting I assume this relates to port 80 incoming. Please describe a little more completely what you are trying to do.
Your last statement may be the most factual: "... the rocket hub not enabled to do this...".
Please believe me when I say with great sincerity that I still don't know what you are talking about in terms of technical details. In principle, right from your first posting, I was fairly convinced that I understood more or less what you were trying to do with your security cameras.
I don't know what the "designated dvr port is", I don't know what the mobile port is, and I do know what port 80 is.
I also don't know what you mean by "...tracked my IP...". Do you mean you did a traceroute? and from where to where did you do this traceroute.
And you will most likely need to do your troubleshooting from both ends of the connection you are trying to set up.
If you want us to understand what you are doing you need to provide exact details on what equipment you are using, and how you have that equipment interconnected. And when you do troubleshooting such at a traceroute, provide us with the detailed text of what you get back from your investigations. "...ip stopsToronto" tells us very little!
We already know the Leafs are dead in the water. Oh, sorry, on the ice.
from personal experience, I can't tell you if the RocketHub allows port forwarding. In the first place, we still don't know what kind of RocketHub you are using. Rogers has sold several types: the Ericsson W35 as well as several variants of the Netcomm. They have different management user interfaces and capabilities, I would assume.
Secondly, have you taken a look at the documentation for the RocketHub which you are trying to use? As well, Google on what you want to do, and see if you can find anything out there that would help.
I don't think that "...overuse of bandwidth..." is likely an issue with port forwarding. Rogers will just charge you more for the monthly data volume you use. I can well imagine, however, that if you have a constant video feed from security cameras over an Internet connection, that the data volumes on the Internet RocketHub connection would be quite high.
Your comment about a "...crtc lawsuit..." would seem to indicate that you and Rogers have a past history in this matter. Would you care to elaborate on what you have tried in the past?
I'm not sure that we can help you get out of your Rogers contract based on your security camera setup not working. This is not exactly your vanilla-flavoured email/browsing/ file downloading scenario that most RocketHub users would be doing.
you are correct, and I apologize. You did identify the Netcomm in your title line, and I missed that.
I now understand better what it is you are trying to do. I own an Ericsson W35 RocketHub, and have attempted to access it from elsewhere on the Internet with no success either. I was trying to set up a test web server at home.
I reasoned that, first of all, in order to prove to myself that a significant amount of effort was justified, I need to be able to "ping" my RocketHub's Internet address.
Initially, I recorded the W35 Internet-side IP address, and then tried to "ping" it from my work location. It was not successful.
Then I used this website to determine what my supposed "real" IP address on the Internet was:
The address displayed there is substantially different from what is shown on the RocketHub as the Internet address. I tried to "ping" that address. Again, no success.
Then I did an outbound "tracert" to 18.104.22.168, the Google DNS site. Neither of the two IP addresses I mentioned above showed in the tracert, although there were IP addresses that were reasonably close. But again it did not prove much to me.
So, at that point I stopped my efforts, because I just put my web development stuff on a server elsewhere that I could access easily.
I suspect though that in order to do in-bound port 80 accesses to the RocketHub I may need to get a public IP address from Rogers, at an additional cost. Again, I am not sure that these are even available for data devices on the cellular network such as the RocketHub.
Perhaps others in this Forum can comment on this matter, as I do definitely not have the definitive and final answer on this.
I also did not pursue the matter with Rogers, as currently I am not feeling masochistic enough to inflict that on myself.
Did you ever find a solution to the port forwarding on the Rogers Rocket Hub. I have the same problem trying to access my security camera's. I paid for the "Public IP address" and paid for the level to support, but have not gotten anywhere. Surely there are others with this problem and a solution somewhere in cyberland ????
I have set up port forwarding on my Netcomm 3G25WR to remotely access my security camera system. In order to access the modem remotely, you will require a static IP address from Rogers at a cost of $10 additional per month. The modem firmware then needs to be configured to reflect the static IP address. I would imagine that the set up can be done on the 3G10WV as well.
As I mentioned in another post, I believe that you need a static IP address to access your modem remotely. The public IP address only ensures that you are not behind Roger's firewall, but the address itself changes. The static IP address always remains fixed.
call back and make sure they put the public ip on your rocket hub. I called to check on it and they screwed up and put it on my iphone. after verifying the rocket hub has the public ip, make the following changes under 3g settings, disconnect tab first then follow these tabs.
HSPA/3G Settings > SetupProfile: fixed-isp.apnCustom APN
IP Compression: OffOn Data Compression: OffOnBand select: All Bands/Automatic 3G-ALL 2G-ALL
Thank you for your reply. I do have Public Ip address however I cannot decifer your reply. I can see all of the options after I disconnect but I can't tell from your reply which selections I should make, only the options that I have. Also you use wap as Username etc. do I need that or can I make up my own username etc......Thanks again, I really hope this works. I have three security camera's that are worthless to me right now.
Any ideas on the same issue with a 3g27wv, tring to open port 80,9010,9011 with rogers and just will not work even after having to get the static IP