cancel
Showing results for 
Search instead for 
Did you mean: 

ROGERS APN

buzzmobile_us
I've Been Around

Here are the Rogers APN settings which might be useful for other users who are having trouble with the data or internet connection in their unlocked phones. Use this apn settings and try.

Internet APN Settings

APN: internet.com
Username: wapuser1
Password: wap

 

Rogers MMS(Picture Messages) Settings

APN: media.com
Username: media
Password: mda01
IP Address: 172.025.000.107
Message Server: http ://mms.gprs.rogers.com


If you are using a Smartphone and the above apn does not work.
Try the one below.

Name: Rogers MMS

APN: rogers-core-appl1.apn

MMSC: http ://mms.gprs.rogers.com

MMS Proxy: 10.128.1.69

MMS Port: 80

MCC: 302

MNC: 720

APN Type: mms


If you are looking for the LTE Rogers APN settings then here is it:
Rogers LTE APN Settings

APN: ltemobile.apn


(No need for a username and password)

Internet APN Settings

APN: internet.com

Username: wapuser1

Password: wap

 

Rogers MMS(Picture Messages) Settings

APN: media.com

Username: media

Password: mda01

IP Address: 172.025.000.107

Message Server: http ://mms.gprs.rogers.com

 

If you are using a Smartphone and the above apn does not work.
Try the one below.

Name: Rogers MMS

APN: rogers-core-appl1.apn

MMSC: http ://mms.gprs.rogers.com

MMS Proxy: 10.128.1.69

MMS Port: 80 MCC: 302

MNC: 720

APNType: mms


If you are looking for the LTE Rogers APN settings then here is it:
Rogers LTE APN Settings

APN: ltemobile.apn
(No need for a username and password)

 

GoRogers APN Settings

APN: goam.com

URL: http ://mymobilehomepage.rogers.com

Username: wapuser1

Password: wap

Port1: 80

Port2: 9203

Port3: 9201

IP1: 172.025.000.107

IP2: 208.200.067.150

IP3: 208.200.067.151

DNS1: 207.181.101.4

DNS2: 207.181.101.5

 

Credits: rogers apn

 

***edited labels***

166 REPLIES 166

Re: ROGERS APN

Hello @gerardb2017!

 

Welcome to our Community Forums!

 

I moved your post here as the answer you seek should be in this thread. Were you able to input the APN settings into your device successfully?

 

I've done a bit of digging for you and I do have to warn you that this device is not fully compatible with our network. It's likely you will not be able to connect to LTE with this device. At most, you'll get 3G.

 

Regards,

RogersCorey

Re: ROGERS APN

Hello!

I'm running into an issue with my phone, which is a Xiaomi Mi MIX. I've had this phone for over a year, and I've been able to use it just fine up until today, when I accidentally deleted my APN while trying to troubleshoot an intermittent cellular signal issue. This APN was internet.com or internet.apn, can't remember.

 

Here are my current settings:

APN: ltemobile.apn

Server: 172.25.0.107
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
APN Type: Internet + MMS

 

I'm able to make/receive calls and texts, but data is practically non-existent. Instagram won't load, web pages time out, and messaging on WhatsApp and BBM is very, very slow. The odd thing is that the phone is reporting a connection to the 3G and 4G networks, but even sending a message on BBM or WhatsApp takes a very long time.

 

 

The APN I had before was working great. Does anyone know what the rest of the details might be for it? Again the APN was internet.com or internet.apn.

 

Any suggestions are welcome.

Re: ROGERS APN

mamigo
I'm Here A Lot
So I found the old setting I used to have, and everything is back to normal (aside from the intermittent cellular signal since switching to the 10 GB $60 plan). Here are the settings I'm using:

APN: internet.com
Username: wapuser1
Password: wap
APN protocol: IPv4
APN roaming protocol: IPv4
Bearer: Unspecified

Everything else is to be left blank. Working great on Xiaomi Mi MIX.

Re: ROGERS APN

MrDenis
I've Been Here Awhile

 

Using an international varian of the Note 8 (SM-N950FD)

 

Hi,

 

So I got the above phone as I really wanted a dual sim phone, but I also am a sucker for Samsung. Anyway, it works and all, but I only get HSPA+ grade speeds where I should have LTE. I input the LTE APN, my Canadian S7 gets great speeds with the same sim card, but the Note 8 just tops out at 10 Mbps (and the logo is H+ as well, but I know that can be misleading).

 

There are a few LTE bands that are different in the 950F vs. 950W, but would those really kill LTE all together? I seem to have read that this very phone gets LTE speeds on Bell, so I'm thinking maybe I'm doing something wrong? Any ideas?

 

Thanks

 

UPDATE: Well, another case of Read the Manual! Changing the APN protocol to IPV4/IPV6 had it working!

Re: ROGERS APN

PaulS7
I've Been Around

This is what worked for me - use these settings (enter them exactly):

 

Name: Rogers LTE 

APN: ltemobile.apn

Proxy: Not set

Port: Not set

Username: Not set

Password: Not set

Server: Not set

MMSC :http://mms.gprs.rogers.com
MMS Proxy: mmsproxy.rogers.com
MMS Port: 80
MCC: 302
MNC: 720

Authentication type: None
APN Type: default,mms,supl,hipri  <-- no spaced between commas!

APN protocol: IPv4/IPv6

APN roaming protocol: IPv4

Bearer: Unspecified

Mobile virtual network operator type: None

Mobile virtual network operator value: Not set

 

And for mobile data teathering, create another APN with the following settings:

 

Name: LTE Tethering

APN: ltedata.apn

Proxy: Not set

Port: Not set

Username: Not set

Password: Not set

Server: Not set

MMSC : Not set
MMS Proxy: Not set
MMS Port: Not set
MCC: 302
MNC: 720

Authentication type: None
APN Type: dun

APN protocol: IPv4/IPv6

APN roaming protocol: IPv4

Bearer: Unspecified

Mobile virtual network operator type: None

Mobile virtual network operator value: Not set

 

Hope this helps someone out there!

Re: ROGERS APN

DChoules
I've Been Around

Problems with watch phone connection

 

I bought a child's watch phone and am having trouble getting it to work. The manufacturer is asking me to provide apn and mccmnc information. What is this and where could I find it as it pertains to my account?
Thanks
David

Re: ROGERS APN

Good morning @DChoules,

 

Welcome to our Community!

 

You should be able to find the settings you need in this thread 🙂 If you need help with setting up the device, you could try posting more info on it and our intrepid Community members would be better able to help!

 

Regards,

RogersCorey

Re: ROGERS APN

Wanderlust099
I've Been Around

I have a Netgear MBR1210 router with an HSPA+ modem that has been unlocked.  The router accepts my Rogers LTE SIM but the configuration is non-Rogers.  The modem configuration accepts the APN without issue but is also looking fir PDP type [options are IP. PDP-IP, PPP or PDP-PPP] and Access Number [default *99#].  The suggestion is that for Rogers the APN should be ltemobile.apn with username and password blank.  Unfortunately, these values don't connect.  For what I can gather, these devices were made to Bell Canada specs and my Rogers SIM will roam onto the Bell network. Indications are that the device supports the needed frequencies for use on the Rogers network.  The model above this is the MBR1516 which has the same configuration but has additional frequency support for LTE. 

 

What settings are needed to get this modem to connect to the Rogers network?

 

Thanking you in advance.

Re: ROGERS APN

Hello @Wanderlust099!

 

You can find our LTE APN settings here: https://www.rogers.com/customer/support/article/rogers-lte-apn-settings and our Core APN settings here: https://www.rogers.com/customer/support/article/rogers-core-apn-settings.

 

If these settings do not work, you may need to reach out to the manufacturer of this device for further assistance. We can only offer direct help for official Rogers devices. 

 

Regards,

RogersCorey

Re: ROGERS APN

BS
I'm a Senior Advisor

One important minor adjustment that may avoid MMS issues if you have WIFI calling set as WIFI ;priority, or in somecases, just being connected to WIFI at same time as trying to get to WIFI.

 

In another thread on MMS and WIFI on issues (MMS won't come through or go out when WIFI on)

 

Solution that some have found is to change APN roaming protocol: IPv4

to be IPv4/IPv6.

 

It appears that when the system is using WIFI instead of data that when it can't push the MMS through WIFI which Rogers does not support - a few in the US do, but not many - it goes roaming for a way to send and it appears that the IPv6 is now a requirement as it is becoming pretty standard.

 

It has solved the problem and I found it has solved my wife and my MMS issues.

 

Note that a default provisioning of this information is pushed to your SIM card on activation, and you will have a default Rogers APN settings - this cannot be edited as it is in use.

 

Create a new one, named something else, I just called it New Rogers IPv6

 

Save it and choose to it.  Note that some have had the old provisioning pushed back out and had to reset it, but a recent catch by one person was that if Rogers support second level pushed out a new provisioning, it seems to get the correct provisioning in place.

 

I have not heard anything official posted on this issue from Rogers at this time.  It is actually a known issue since 2013 first identified by t-mobile users and they first identified the solution.  Our past Rogers Dave also discussed it, but it seems to have not made it to profile availability in support docs online, or with the support teams.

 

Bruce

Re: ROGERS APN

Elmwoodie1
I've Been Here Awhile

last Windows phone on the Rogers network?

 

somebody out there still running a Windows 10 phone on the Rogers network?  or am I the last?

 

 

got data going, but cant get mms going.  As us Windows phone users know, the fields to enter for the mms APN are a little different in Windows phone.   Yes, I read that site with all the MMS APN settings for Windows Phone and Rogers.

 

If I am not the last Windows phone user on the Rogers network AND you have mms working, could I trouble you to take a look at your mms apn settings?  THANKS!


Windows Phone MMS APN fields:

profile name:    rogers
APN:     ltemobile.apn or media.com
username:    <blank>  or media
password:    <blank>  or mda01
Type of sign in: (none/pap/chap/auto) tried em all
IP type:(ipv4 ipv6 ipv4v6 ipv4v6XLAT) tried em all
proxy server:    10.128.1.69
proxy port:    80
mmsc (URL)    http://mms.gprs.rogers.com
mmsc port    80
maximum mms size (KB)   tried 1024 and 2048

 

Re: ROGERS APN

Elmwoodie1
I've Been Here Awhile

The SIM automagically can send mms when dropped into an old Lumia 1020.

The problem is on an Alcatel Idol 4 PROs. Which apparently requires a manually modified mms apn.

 

and the solution is..... Set the mms proxy to MMS Proxy: mmsproxy.rogers.com  NOT the ip address above. 

Tah dah!  I'm so happy and I am the last Windows phone user on the Rogers network.

Re: ROGERS APN

Pakochan
I Plan to Stick Around

No LTE/4G with unlocked Huawei P20 Lite

 

Hi, 

      I am not getting LTE on my Huawei P20 Lite I go from Amazon.

The P10 Lite I got last year works fine.

The P20 has the exact same LTE bands.

Tried the automatic APN settings which are the same as the P10 and some variation posted here but no luck.

The only difference is the Android version.

Any known problems with that device and Rogers?

Re: ROGERS APN

Hey @Pakochan,

 

Thanks for your post and welcome to the Rogers Community!

Being able to use everything that is included in your plan, with your new unlocked device, is a goal we want to help you achieve. We haven't had reports of users experiencing issues with that particular device, however, we don't officially support non-Rogers phones.

 

You indicated that you were unable to access Rogers LTE and 4G network. Therefore, if I understand correctly, you're able to connect to 3G, plus, you also have the ability to send and receive MMS.

 

If it is the case, the only thing you should edit is the specific APN input (all of the other settings should be fine).

These settings are to be programmed to a wireless device for LTE functionality on the Rogers Wireless Network.

 

Settings

Details

APN

ltemobile.apn

Username

Not required

Password

Not required

 

For further assistance, please specify what has been entered in the APN Settings of your phone, so we can help you identify the cause of the problem.

 

Hope this helps!

 

RogersMaude

Re: ROGERS APN

Pakochan
I Plan to Stick Around

My APN settings are correct. 

ltemobile.apn

but still not working.

I can see 'Rogers 4G' in my available network but it's not connecting.

The phone specs says '4G/LTE 800(B20) / 900(B8) / 1800(B3) / 2100(B1) / 2600(B7)'

I should connect on B7 just like my Huawei P10 was doing but the P20 doesn't.

Elsewhere I see LTE (FDD TDD) and using https://www.frequencycheck.com/ it says the phone won't get 4G anywhere in the world despite been an international version.

How can 2 phones with the same bands have different connectivity to LTE?

Re: ROGERS APN

Hey @Pakochan

 

Thanks for sharing the information.

 

Please take a look at the links below where you will find our LTE APN settings

here: Click Here

 

Our Core APN settings here: Click Here

 

If you still run into issues then you may need to reach out to the manufacturer of this device for further assistance as we can only offer direct help for official Rogers devices.

 

Thank you for your understanding and hope this helps.

 

RogersTony

 

Re: ROGERS APN

CDNTechEast
I've Been Here Awhile
I support android based M2M devices using a 3G modem on the Rogers network and the internet.com is the one we are using. They are often and yet randomly losing connectivity. The core settings I see posted always talk about smartphones, which these technically aren't. Is there a data apn for M2M devices?

Re: ROGERS APN

Hey @CDNTechEast!

 

Intermittent connectivity can certainly get in the way of productivity! There are data only APN's for rocket hubs/sticks. The APN setting itself though wouldn't likely be causing an issue. Have you reached out to technical support yet to determine if the intermittency is being caused by a signal related issue, be it distance from the nearest tower or attenuation. Also, does the intermittency only occur in a particular place or anywhere and at random?

 

So you can confirm the APN settings you're using the following are the data only APN settings available:
 

fixed-isp.apn 
LTEDATA.APN | 268 
LTEINTERNET.APN | 267 
LTEMOBILE.APN 
ISP.APN   
ROGERS-CORE-APPL1.APN   

 

@RogersAndy
 

Re: ROGERS APN

jo9008
I've Been Around

adding vpn info of rogers on other android phone already active with koodo

 

is it possible for me to setup a new APN to my lg k40 that it already on prepaid plan but with telus? *** i've taked the ROGERS infinite plan yesterday and did not received my sim card.. im wait before it **** There is a way to use my roger data now ????

 

 

 

 

Re: ROGERS APN

Good evening @jo9008,

 

Welcome to the Community!

 

Glad to hear you're looking to activate a new line with Rogers. Your device should work as long as it's not locked to a specific network. You can check out the APN settings as indicated in the Accepted Solution post. 

 

Typically it takes about 3-5 business days to receive a shipment, in case of a SIM card it can be quicker than that. Just as an FYI you do need a SIM card to connect to the Rogers network.

 

Hope this helps!

 

 

 

RogersZia