Like many others, I recently picked up the Nextbox 3.0. Right off the bat, I began experiencing issues with the box not responding to remote commands, which seems to be a problem experienced by several others judging by some threads on this board. At first, I suspected a faulty remote, then faulty hardware, but after a thorough process of elimination (which included a Rogers tech visit and hardware swaps) I've come to the conclusion that the culprit is actually my Samsung plasma TV.
If you're experiencing a similar issue with the box not responding to remote input, try this simple experiment the next time your remote stops responding: turn off your TV (but not the Nextbox) and try changing channels. You'll need to make sure the box is configured to display the channel numbers when changing channels (this is the default). In my case, the box immediately begins responding to the remote. In fact, since I have a plasma, it even begins responding if I tune to an unauthorized channel or to any channel currently displaying a darkened scene. It seems the TV interferes most with the remote when displaying a bright scene. This behaviour may differ with an LCD TV, since the source of interference is likely to be a backlight (that is always on).
So, what is the solution? If you're lucky, you may be able to fiddle with the display or backlight brightness (some TVs have an auto-brightness setting that seems to cause problems). If that isn't an option, try moving the Nextbox around in the room.
If that also doesn't work, try taping a piece of darkened film or a sunglass lens over the IR lens on the Nextbox (it is on the right side, near the Cisco logo). If you don't have access to a film or lens, you can even try taping over one or more pieces of plain white paper, a Post-It note or even masking tape. It may take several layers of paper or tape, believe it or not.
Apparently, what this does is block the IR (infrared) noise generated by the TV. The IR signal from your remote should be stronger, and can penetrate through the film or paper.
A longer term solution may be to find a better IR receiver and plug that into the Nextbox (it has an IR extender input in the back). I've ordered one from Amazon and will report back with my results when it arrives.
Solved! Solved! Go to Solution.
A couple people have found this already with this box (and it happened on the NB2 as well)
Very good description of what is happening 🙂
Yeah, USUALLY if your tv supports it, to TURN off the auto brightness (sometimes called eco mode, etc), will usually fix it... but some good ideas otherwise 🙂
(i know my TV has that brightness thing set.. so when i get my box today.. i will test and see if it has this issue or not. I know i didnt have it with the NB2, but my NB2 is in a cabinet behind glass.. the glass itself may be enough of a filter for the noise)
I posted this in the other threads about this issues. This is a very simple and effective solution
This will fix the issue you are experiencing, with the added bonus of being able to change channels from most parts of your house.
Unfortunately, its not a FIX thing.
This happened, even back on OLDER rogers boxes as well.. with the newer TVs. There is just too much interfearance, that it interfears with what is comming OUT of the remote that the box can not pick it up properly. WIthout completely changing the remote, etc.. cant really be fixed.
Best way to fix it.. is to turn OFF that mode, on your TV. (or cover the sensor, etc if you are able to find out where it is, etc).
He's back! Irish superstar Conor McGregor makes his return to the Octagon on January 18, and he's kicking off 2020 with a welterweight showdown against the man with the most wins in UFC history, Donald "Cowboy" Cerrone. Returning to action for the first time since October 2018 in the main event of UFC 246, the two-division champion from Dublin known as "The Notorious" one wants to make a statement against Albuquerque action hero Cerrone, who has picked up five post-fight performance bonuses in his last five bouts.