Does anyone have any information on any upcoming update the the PVR system?
It's the only thing I absolutely HATE about Rogers. The whole PVR set-up sucks!
There have been rumours of a new system coming soon, but if it doesn't come soon I may have to switch my TV just so I can get a half-decent PVR.
Yes, did all that with the eHDD. I cannot connect to a computer. The list still shows all of the previously recorded shows, but none will play. And obviously with recording space going from 46% to 3%, they are no longer available.
Well that's not good. Dammit Rogers, what's going on? I see you posted over at Digital Home, so hopefully someone, somewhere will know a solution.
Rogers is aware that some customers are experiencing issues with the Scientific Atlanta 8300 PVR box and we are working with the manufacturer to resolve as soon as possible.
We take this very seriously and want to help you resolve current problems.
By contacting Technical Support, our agents can help troubleshoot your particular issue and identify potential workarounds.
We appreciate your support in reporting the issues you are experiencing because if will help the manufacturer provide a permanent resolution.
My roomie had the same issue and he just told me that (until he swapped the box for the 8642HD) he would have to do the following:
1. Turn off the eHDD
2. Unplug it.
3. Reboot the box with at least a 30 second down time.
4. Wait until it boots up and then...
5. Replug the eHDD
6. Turn it on
7. Turn on the box and hopefully you will be able to access the recordings.
Thanks a lot for trying to help pmcsplaza. I did all of that this morning and no luck at all - still at 3% recording space used. I called Rogers tech support as suggested by RogersErin and they set up a ticket but are not hopeful the recordings will be recovered. The funny thing though is that Rogers keeps trying to blame Cisco, but I warned them in many emails about all ofl the problems with the firmware update but they would not listen. They kept pushing through the update. The update was forced upon us by Rogers - not Cisco. I have also sent a strongly worded email to Office of the President outlining all of the Rogers boondoggles over the past few years - not just with Cable, but also with Internet, Wireless, and Home Phone! It is quite simply getting to be too much to take anymore!
If Rogers is blaming Cisco for the many problems occurring with the PVR's, perhaps that should be a very strong indicator that it's time to change suppliers! Let's get boxes that not only work, but also have those super advanced high tech features we want, like, you know, SEARCH! Seems like a perfect opportunity for Rogers to begin discussions with Tivo to perhaps forge a partnership with them. With Rogers' subscriber base, I'm sure it is something that would be worth Tivo's attention.
As you suggested, we have contacted Rogers Technical Support regarding issues since the Software/Firmware upgrade 6 times in the past 2 months (random PVR reboots, missed scheduled recordings, etc). Your post leads us to believe that the Technical Support staff is aware and up-to-date on this issue. However, it is evident to those of us who contact Technical Support (way, way, way more than we ever would want to) that the Technical Support staff is not aware of the current issues and do not have adequate knowledge to troubleshoot/resolve the issues.
The consistent "canned" response we receive from the Technical Support team is to replace our box citing "it's a hardware problem". Unfortunately nobody from your Technical Support team can ever tell us what the exact hardware problem is that would cause the issues. It was encouraging to read in your post that it seems that Rogers will be able to resolve the issues (eventually), and that a box replacement is not necessary/wouldn't fix the problems anyways. Luckily we read your post before going and shelling out the cash.
We own our Scientific Atlanta 8300HD PVR and our Rogers PVR Extender and it is incomprehensible to us that someone would tell us we need to spend $500 to replace our PVR without providing any details as to what the exact hardware problem is. We have done our part to proactively contact Rogers with our issues, we have complied with their suggestions/recommendations to constantly unplug and reboot our box, have sought more details through this and other forums, and have been patiently waiting for Rogers to fix their fumbled "upgrade". Rogers, for their part, has failed to provide any proactive information to their loyal and paying customers about why their products and services are failing.
Do you have any more information to give us direction on how to manage in the interim, and how long this "interim" might be?
Here is another weird thing that we have noticed with our recordings. We have one show set to record every day from 5 AM - 6 AM. By my calculation, that would be 1 hour of recording time. Yet when we go to play the show, the recording time is always less than 1 hour - 54 minutes, 58 minutes, 56, minutes etc. The show is not split into 2 recordings either. For some reason the full hour is not recorded. So once again, I would like to know if Rogers is going to step up to the plate and give us some information here to let us know what us being done about this fiasco. The update was done 6 months ago and people are still experiencing lost recordings, split recordings, set recordings which disappear, and hard drives spinning up and down. You might want to blame Cisco, but it was not Cisco who rolled out the update and continued to ignore customer complaints.