Hello, I have three standard CRT television sets hooked up with direct cable NO STB. On all but one I get terrible noise and cross talk from another channel ONLY on Channel 6! How can I eradicate this annoyance. I live in the Orangeville area. My Plazma TV is connected directly to NON Digital cable(no STB) and channel 6 is noise free. I've checked connecting cables etc. HELP! The one CRT set works fine on channel 6. Very confusing. Thanks
I see you said you checked the cables.. what about plitters, etc.. how are things wired up?
Often the case with the STB, there can be signal issues, with cheaper or burned out splitters. There could be one of them, causing issues on the signals going to those specific TVs.
Worth taking a look at, maybe replacing.. even try removing and just doing direct (using a connector) to see if it still happens without the splitter there.
Hey thanks for the advice. Back then I gave up and rented a Nextbox so I could watch channel 6 CBC. I am in the Orangeville area and to this day I still cannot get CBC Channel 6 for Hockey Night in Canada on my straight wired set!! I also had to get digital adaptors for my older tv sets. Very annoying and presently none of my adaptors are working and my Nextbox is malfunctioning due to weak signal. Here we go gain I will check the multiplexers again. Thanks
Since Rogers will supply free DTAs, why not just get those? Renting a Nextbox for the sake of one channel seems overkill.