I am trying to delete a show, but I keep getting an error "cannot be deleted right now. it is currently being viewed"
Is there a different way to delete this?
Solved! Solved! Go to Solution.
I think a reboot would fix it but I want to know if anyone else has this issue because I think there may be something wrong with the box, when I set to 1080p it seems to switch to 480i 16:9 mode, and radio stations sound choppy.
I can stop and delete things normally, but "stop recording without saving" seems to cause errors.
NextBox 3 is so buggy for me when it comes to deleting files.
It constantly freezes after deleting some shows for me:
RE-BOOTING DIDN'T WORK!
On an 8642HD Nextbox the daily show "Marilyn Denis" was recorded as a series. There were 10 recordings which are usually viewed at night or on the weekend. After watching one of the series, it could not be deleted even though the user said she pressed the buttons slowly due to the perpetual signal delay. The Nextbox was then rebooted, which is now standard practice for us, but it would still not delete the series recording.
I took the remote and kept pressing delete-select, yes-select to see if the software was just not receiving the to signal due to signal delays. After about 8 attempts to delete, it finally reacted and the programmed recordings went down to 9.
We have a 9865HD and 8642HD Nextbox and the 8642 is painfully slow to react to user commands. The responsiveness is so bad it took us 30 minutes in total to delete this one program.
Thanks to the RE's who are trying to help, but Rogers really must address these problems. I am not being paid or credited to do this beta testing for Rogers to find these errors.
For gdkitty, you can add this issue to your list. Has anyone from Rogers given you any indication that they are actually doing something about this malaise? So far, I have received nothing from Rogers about these problems.
I have noticed same problem, if you really want the system to react go to anyplace TV manage PVR and it actually works.I have Cisco Explore 4642 HD and it runs like a dinasour ,very dissapointed have 2 of these boxes own one of them. The truth is if you want the system to respond you have to run 3.0 boxes I personaly beleive the new Navigator is only suited to 3.0 box
Thanks. I noted that Rogers Anyplace TV™ Home Edition is offered at no additional cost with your Digital TV package (excluding Digital Starter Package) . However, there seem to be issues with synchronization, delays, and fewer channel choices. I originally had the 4642HD box with a Seagate External Storage Device but after a Rogers upgrade I lost the Index and all the programs on the Seagate Extender. They apologized! I have lost faith in Rogers capability for software integration. There are so many software glitches with Rogers Navigatr, that I don't want to try Rogers Anyplace TV™ right now. Better the devil I know than the devil I don't know.
After a Rogers upgrade last week I needed to readjust the picture size.
I noted that the supposedly better progressive1080p HDTV on Settings - Appearance - TV Type caused the picture to have a constant and regular flicker, plus an audio "click" sound. The interlaced1080i HDTV setting worked better.
As of yesterday, I can't always delete my recordings as I watch them. Sometime it works and other times it doesn't. When it doesn't work, I get a message saying "XXX cannot be deleted right now. It is currently being viewed" but I've actually finished watching.
If I select "Watch", then I get the message saying "XXX cannot be viewed right now. The progam may have been deleted or there may not be enough resources available"
I'm in Mississauga, I'm on the new Navigatr, and I have a Nextbox 2 and a Nextbox 3, neither of which will delete shows.
Any suggestions other than rebooting the box which I've done about 5 times!
As of yesterday, I can't always delete my recordings as I watch them....If I select "Watch", then I get the message saying "XXX cannot be viewed right now. The program may have been deleted or there may not be enough resources available"...Any suggestions other than rebooting the box which I've done about 5 times!
I was getting this issue and resolved it by:
- Rebooting the box (sorry :)),
- Deleting all watched shows (optional - to clean up the box and free space),
- Deleting ALL scheduled recording triggers (manually via scheduled recordings tab, or via "Cancel all Scheduled Recordings" on right side of screen inside tiles for each show),
- Setting all programs to record again via "Rogers Home Edition" app on iPad (or manually via the guide).
Try the above on a specific program that is giving you trouble, and then wait for a new episode to record. Does this help resolve the problem?
ALSO - don't forget to scroll all the way down on the Recordings screen and look for & DELETE "zombie" scheduled recording triggers (usually just a picture or blank tile, with no recorded content or scheduled items inside it).
Please let us know how you made out!
Thanks for your suggestions but unfortunately none of them worked for me - I had tried all of them before posting.
I reported the problem to Rogers and they escalated the issue to Engineering; within 24 hours I received an email response advising the problem was resolved. Of course when I got home from work tonight, nothing had changed and the problem was still ongoing.
I called Rogers again and, as expected, my two options are 1) swap out the box or 2) do a factory reset - both of which mean I lose all my recordings AGAIN!
At least I can still watch recordings and the PVR records shows that were set previously. So, for now, I'm continuing to hope that somehow a new software update will magically resolve the problems.