cancel
Showing results for 
Search instead for 
Did you mean: 

CGN3ACSMR or Internet Issue

DansomeWoja
I Plan to Stick Around

So I recently changed my internet plan about a month or so ago, so I got the CGN3ACSMR with the new plan and for the past week I've been literally limited to any internet access. I even had my firmware upgraded to 4.5.8.16 from I believe .14 to see if it helped since there is issues with that version found under http://communityforums.rogers.com/t5/forums/forumtopicpage/board-id/Getting_connected/message-id/253... not strictly to League of Legends for me but overall I just had no access so I updated, I'm really getting fustrated, what should I do? It was working before, now it's not stable.

InternetWTF.png
(Writing info on images until mod approves)
PingTest.net
587 Pingms, Jitter 1015ms
Packetloss 22%
Distance, 250mi

This was my ping test. The only way I usually have temporarily internet is by switching the Wireless channels around. I had 28% packlet loss in one of my earlier tests. Is something wrong in my internet settings? is my router the problem?(defect). Help me please 😞

My internet download/upload package is 100/10 I believe but on speedtest I got this...
12 ping, 0.56 download, 8.15 upload

speed.png
http://www.speedtest.net/my-result/4452507179

65 REPLIES 65

Re: CGN3ACSMR or Internet Issue

Datalink
Resident Expert
Resident Expert

We won't see the ping test image until the mod approves the image.  You can actually copy the text from the command box by right clicking on the title bar, go Edit, Select All, and then once again this time Edit, Copy.  Then you can paste in the text into notepad so that you can copy just the section that you want to paste in here. 

 

Can you log into your modem, navigate to the STATUS....DOCSIS WAN page, copy the Downstream and Upstream tables and paste them in here.  Those contain the RG-6 cable signal levels and signal to noise ratios.  They might show if you have a signal issue on the go.

 

To sort out the issues the best place to start is with the wired issues first, which is why I asked for those tables.  For wireless, you can load inSSIDer onto a laptop which will let you look at your wireless environment and determine if you have problems with overcrowded channels at your location.  The link below is for the last freebie version of the program and does not display 802.11ac networks which the CGN3ACSMR is capable of transmitting.  It will monitor 2.4 and 5 Ghz N networks.  If you are using an 802.11ac 5 Ghz network, there is now a pay version out that will display those networks that can be detected by your laptop wifi. 

 

http://www.techspot.com/downloads/5936-inssider.html



Re: CGN3ACSMR or Internet Issue

DansomeWoja
I Plan to Stick Around

Downstream Overview

Port ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID Signal noise ratio (dB)
1 663000000 256QAM 0.500 12 35.780
2 591000000 256QAM 0.000 1 36.610
3 597000000 256QAM 0.600 2 36.610
4 603000000 256QAM 0.300 3 36.610
5 609000000 256QAM 0.000 4 36.387
6 615000000 256QAM -0.500 5 36.387
7 621000000 256QAM -0.500 6 35.780
8 633000000 256QAM 1.100 7 36.387
9 639000000 256QAM 1.200 8 36.387
10 645000000 256QAM 0.000 9 35.595
11 651000000 256QAM 0.200 10 35.780
12 657000000 256QAM -0.700 11 35.780
13 669000000 256QAM 0.800 133 35.780
14 675000000 256QAM 1.500 134 35.780
15 681000000 256QAM 0.900 135 35.780
16 687000000 256QAM 0.000 136 35.595
17 693000000 256QAM -0.400 137 35.595
18 699000000 256QAM -0.900 138 35.780
19 705000000 256QAM 0.400 139 35.595
20 711000000 256QAM 1.300 140 35.780

Upstream Overview
Port ID Frequency (MHz) Modulation Signal strength (dBmV) Channel ID BandWidth
1 38596000 ATDMA - 64QAM 45.750 5 3200000
2 23700000 ATDMA - 64QAM 45.750 7 6400000
3 30596000 ATDMA - 64QAM 45.750 6 6400000

Sorry if it's not clear enough since it's tight together, will this ok and should I post a pic?

Re: CGN3ACSMR or Internet Issue

Nope thats good.  The downstream signal levels are good, the signal to noise is borderline at the bottom of where they should be.  The normal levels are 0 dBmV for signal levels (ideal) with a signal to noise range of 36 to 40 dB.  The downstream levels are elevated, getting close to the point of calling for a tech, but, not just yet.  The normal upstream levels are 36 to 40 dBmV with an upper limit of 51 dBmV for three channel operation.  So, I don't expect those levels to be a big problem at the present time. 

 

Do you normally use wired or wireless connections to the modem? And....are you in a house, apartment, condo, highrise, etc, etc?

 



Re: CGN3ACSMR or Internet Issue

DansomeWoja
I Plan to Stick Around

Not sure if this is any viable information but I'm on channel 3 right now, so probably going on AUTO won't work or the other main channel will have different speed.

I'm on wired for laptop connection(ethernet from modem to laptop), wireless for devices.  6th floor in a condo that I believe only accepts Rogers Internet.

My wifi speed is even really slow 😞

Re: CGN3ACSMR or Internet Issue

Ok, I'm not surprised about your wireless speed, especially if you are in a condo, with numerous wifi devices nearby.  If you load inSSIDer on your laptop, you can see in an instant just how crowded the 2.4 Ghz band is, and that in a nutshell might explain a lot of your probems.  If you run a wired speedtest using http://speedcheck.rogers.com/en.html or the www.speedtest.net  Toronto Telus server, what do you get for max download speeds?  Are you able to post a screen capture of the inSSIDer display somewhere.  Either that, or I believe you can pm a copy of that capture to me.  if you click on my name (link) that takes you to the users public page.  On the right hand side is a link to "Send this user a private message".  Follow that link to get to the message composition page, paste in the image, if it will paste in, put a title at the top and hit send.  That should get to my inbox. 

 

Is your laptop capable of using a 5 Ghz network?  Without seeing any screen captures of your 2.4 Ghz environment, I'd bet that the best course of action is to switch to a 5 Ghz network if you can.

 

Here are a few wifi settings that you can check for the 2.4 Ghz network:

 

Wireless mode:  set this to N only unless you know that you need to support any b or g devices.

Channel Bandwidth:  set to 20/40 Mhz.    I doubt that there will be 40 Mhz wide channel available, and if so it will default to 20 Mhz.

Wireless Channel:  normally set to Auto, but if you see a better channel with inSSIDer, use that channel, but just know that other routers hop around.

WPS Enabled:  Set to OFF

 

Security Settings: 

 

Wireless Security Mode:  WPA-Personal

Authentication:  WPA2 - PSK

Encrypt Mode:  AES only.  Do not select TKIP or TKIP/AES.  TKIP is not 802.11n compatible and will cause the modem or any router to run at g rates (54 Mb/s).  TKIP is also no longer secure.  Same goes for using WEP or WPS above.

 

 

 



Re: CGN3ACSMR or Internet Issue

DansomeWoja
I Plan to Stick Around

Leaving it here incase! hopefully mod approves pics in time, I sent you a pm incase 🙂

WIREDCHAN1.jpg
speed2.jpg

Re: CGN3ACSMR or Internet Issue

I won't be able to see the posted images until the morning when one of the mods can approve them.

 

Can you have a look at the back of the modem, and see if the connected port LED is amber or orange, or if it is green.  The amber colour denotes a 1 Gb/s interconnect with laptop.  Green indicates a 10/100 Mb/s interconnect.  The laptop side of this is seen by right clicking on the internet symbol on the lower right hand side of the monitor.  Select Open Network and Sharing Center.  On the right hand side is an "ethernet" link when you are connected via ethernet, and a wifi network when running on wifi.  Select that to bring up the Ethernet Status panel, or wifi Status panel depending on how you are connected.  The Speed that is shown is the connection rate over the ethernet or wifi medium.  Its not the download / upload rate, but the actual connection rate.

 

For an Ethernet connection, it should agree with the colour of the port LED on the modem.  So if the port LED is amber, the speed should show 1 Gb/s.  If the port is green, it will show either 10 or 100 Mb/s.

 

For a wireless connection, this is where the fun starts.  It will depend on the wifi card and how many data streams the card has access to.  That translates to how many antenna are connected to the card.  Laptops typically have two antenna attached to the wifi card, but we have seen a few that only have one.  Throw in the guard channel gap between transmissions and whether or not the card supports 20 and 40 Mhz wide channels and you have a wide range of possible speeds.  These are show here:

 

http://communityforums.rogers.com/t5/media/gallerypage/user-id/829158/image-id/1128i1B0D5B8474F8D75B

 

At close range, on a wifi connection, the speed shown on the Wifi Status panel should match one of those entries under 1 or 2 data streams.  That rate, when multiplied by the coding rate gives you the max data transfer rate.

 

Can you let me know what your max wired speedtest rates are using the sites listed in my previous post, and can you give me the exact model of the laptop.  If you can, drill down into the Control Panel, Device Manager and expand the list of network adapters. 

Copy and paste the wifi adapter model data into the thread so that I can dig up the specs for it.



Re: CGN3ACSMR or Internet Issue

DansomeWoja
I Plan to Stick Around

At the back, where the ethernet cable is, it's flashing orange. I sent you a email btw! One of my pictures got cut off as I cropped it ugh! I'll need to re send/run the channel 1 test again on the inSSider home haha

Ethernet status, "Speed" is 1gbps.

lenovo Idea pad y410p, Core i7, geforce 755m. Model name 20216
Intel(R) Centrino(R) Wireless-N 2230 is the adapter.

When I right click it in device manager ^ It says
802.11n Channel width for band 2, Value 20MHz only.

Max wired on rogers speed thest, 103.95 mbps
Latency 7, Jitter 267ms, upload 10.83

Max wired on pingtest 148.48 (telus toronto)
8 ping, 10.85 upload

I'll look into the max data transfer rate right now

Re: CGN3ACSMR or Internet Issue

DansomeWoja
I Plan to Stick Around

I'm assuming to go into the 5g, just type in the SSID and password given in the model on hidden networks in networks? when I do that, it doesn't connect me 😞 "Can't connect to this network" on my laptop.

Re: CGN3ACSMR or Internet Issue

Thats a no go for 5 Ghz.  Your wifi card does not support it.  Here's the product brief:

 

https://www-ssl.intel.com/content/dam/www/public/us/en/documents/product-briefs/centrino-wireless-n-...

 

The one thing you can check is to ensure that the bluetooth is disabled, unless of course you need it.  It transmits in the 2.4 Ghz band as well, so if you don't need it, it should be disabled. 

 

Got the screenshots.  The response should be in your inbox.

 

Nice laptop!  Too bad they made such a terrible choice for the wifi card.  It puts you in a bad position, lots of competition in the 2.4 Ghz band and a wifi card that only does 2.4 Ghz networks.

 

http://shop.lenovo.com/ca/en/laptops/lenovo/y-series/y410p/

 

Here is the manual for the laptop:

 

https://support.lenovo.com/ca/en/docs/um018401

 

VivienM can help out here with the idea of upgrading the wifi card.  If that could be done easily, that would be my preferred choice of items to consider.  Have a look at the bottom of the laptop to see if there is an access panel that affords easy access to the wifi card. 



Re: CGN3ACSMR or Internet Issue

Can you let us know the outcome of the call to tech support, if in fact that did occur.  Can you also ping the modem, using an ethernet connected laptop.  To do this, bring up a command prompt and type:

 

ping 192.168.0.1 -n 100

 

When that is done, right click on the top title area of the command prompt window, select Edit...Select All.  Right click again to select: Edit....Copy.  Then paste that into something like notepad.  From there, please copy the last dozen or so ping test lines and the final bottom test results and paste that into this thread.  It should look something like what is shown below.  In my case I use 192.168.100.1 as I run the modem in Bridge mode with the Asus RT-AC68U router behind it.  You can also use this same address to ping the modem and to log into it as well.

 

Reply from 192.168.100.1: bytes=32 time=1ms TTL=63
Reply from 192.168.100.1: bytes=32 time=1ms TTL=63
Reply from 192.168.100.1: bytes=32 time=1ms TTL=63
Reply from 192.168.100.1: bytes=32 time=1ms TTL=63
Reply from 192.168.100.1: bytes=32 time=29ms TTL=63
Reply from 192.168.100.1: bytes=32 time=1ms TTL=63
Reply from 192.168.100.1: bytes=32 time=4ms TTL=63
Reply from 192.168.100.1: bytes=32 time=1ms TTL=63
Reply from 192.168.100.1: bytes=32 time=1ms TTL=63
Reply from 192.168.100.1: bytes=32 time=1ms TTL=63
Reply from 192.168.100.1: bytes=32 time=1ms TTL=63
Reply from 192.168.100.1: bytes=32 time=1ms TTL=63

Ping statistics for 192.168.100.1:
Packets: Sent = 100, Received = 100, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 29ms, Average = 1ms

 

Note the outlier at 29ms.  Out of 100 pings, that is the only one that has a double digit return time.



Re: CGN3ACSMR or Internet Issue

Here is some additional food for thought, and that is to use a USB 802.11ac adapter.  Here a PC World article on testing some of them.

 

http://www.pcworld.com/article/2090556/tested-we-push-six-802-11ac-wi-fi-usb-adapters-to-the-limit.h...

 

This is the quick solution to the problem if you're not comfortable with replacing the wifi card.  This would  get you out of the 2.4 Ghz traffic jam and hopefully up into a quieter 5 Ghz band.  Best advice is to spend the money and buy a good one.  Don't go cheap.  We're seen the results of buying cheap and it creates more headaches than what its worth. 



Re: CGN3ACSMR or Internet Issue

DansomeWoja
I Plan to Stick Around

Data! I'd like to personally thank you for helping me out. Never had such amazing support 🙂 I've actually learned alot from you haha
I'll call tech support sometime this week. This week is a bit busy for me, praying the internet doesn't
die out on me or I'll be a bit behind.

I'll look into the wifi cards tomorrow 😄

Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=30ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=7ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=7ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64

Ping statistics for 192.168.0.1:
Packets: Sent = 100, Received = 100, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 30ms, Average = 1ms

Re: CGN3ACSMR or Internet Issue

DansomeWoja
I Plan to Stick Around

on no! I thought I replied earlier but I think I was timed out haha

Data, I'd like to thank you personally for all the help. Never hard such amazing support 🙂
Learning things on the way as well.
As for tech support, I'll call them this week, pretty busy the next few days, hopefully they can help with the jitter issues.
I'll look into the wifi card this week as well

Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=70ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=6ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=2ms TTL=64
Reply from 192.168.0.1: bytes=32 time=4ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=7ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=3ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time<1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=4ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64
Reply from 192.168.0.1: bytes=32 time=1ms TTL=64


Ping statistics for 192.168.0.1:
Packets: Sent = 100, Received = 100, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 70ms, Average = 1ms

I ran multiple ping tests.  This was the highest.

Ping statistics for 192.168.0.1:
Packets: Sent = 100, Received = 100, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 130ms, Average = 3ms

This was the lowest, which is the most recent.  It goes up and down.

Ping statistics for 192.168.0.1:
Packets: Sent = 100, Received = 100, Lost = 0 (0% loss),
Approximate round trip times in milli-seconds:
Minimum = 0ms, Maximum = 6ms, Average = 1ms

Re: CGN3ACSMR or Internet Issue

Thats not too bad for ping times.  I like the 1 ms average better, given a choice.  I wanted to make sure that there wasn't something unusual going on with the modem, but from the ping tests it looks ok.  So, my guess at this point is that there is something going on further upstream that is causing the high jitter numbers.  Fwiw, we've seen multi-unit buildings come up with issues here in the forum and they have shown that a problem in a building such as yours can be hard to solve.  It becomes more of a "solve the issue for a number of people" type of problem rather than a "one of" type of situation.  You should ask a couple of your neighbours to run the speedtest from http://speedcheck.rogers.com/en.html and look carefully at the download speed consistency, ping and jitter to see if they correspond to what you are seeing.  That speed test graph should be flat across the board, from start to end.  If the neighbours results look similar to your posted speedcheck, then this is more than just a tech visit for a single unit.  There would be something else going on that might need some type of maintenance action.

 

Here is what the graphs on my test look like after completion.  This is a wired test, but on the gaming laptop with 802.11ac wifi, it would look the same, with the same speeds.  This is on a 250 Mb/s down, 20 Mb/s up service.

 

Rogers Speed Test 22 Jun 2015.jpg



Re: CGN3ACSMR or Internet Issue


@Datalink wrote:

VivienM can help out here with the idea of upgrading the wifi card.  If that could be done easily, that would be my preferred choice of items to consider.  Have a look at the bottom of the laptop to see if there is an access panel that affords easy access to the wifi card. 


The answer is most likely no. 

 

Lenovo (and HP) both practice whitelisting, i.e. the card in the laptop needs to have a PCI ID that matches one of the 'approved' ones, otherwise it won't boot. For older machines, there were modded BIOSes (which is a practice that makes me extremely nervous) that removed the whitelist; for EFI machines (i.e. anything from the last couple of years) that isn't even an option. 

 

So, taking a look at the HMM (hardware maintenance manual - https://download.lenovo.com/consumer/mobiles_pub/ideapad_y410p_y510p_hmm.pdf for the Y410p), page 87 has the list of 'whitelisted' wifi cards. 

 

Looks to me like you are in luck, as there are multiple cards listed there with dual band (easy way to tell: it says 802.11ac or 802.11a, both of which, unlike n, are 5GHz-only) capabilities. Note that you need the 'Lenovo' version of those cards; versions from other OEM or 'generic' cards are likely not to have the right PCI ID. The ideal one you'd want is WLAN, WiFi AC+BT4.0, Ltn BCM4352+20702 2x2AC+BT4.0 HMC(Y410p), Lenovo FRU 20200381. Interestingly, I just googled that FRU number, and found a whole bunch of forum threads in various places discussing exactly this swap. What I did not find is a good source of that card. 

Re: CGN3ACSMR or Internet Issue

It looks like there is a Broadcom equivelent to the card, the Broadcom BCM94352HMB, and after looking around, it appears that amazon.ca is the only place that its listed in Canada.  There is also a thread that discusses that swap, so it may not be a hard job at all to accomplish this.  Have a look at the following threads:

 

https://wikidevi.com/wiki/Broadcom_BCM94352HMB

 

https://forums.lenovo.com/t5/Lenovo-P-Y-and-Z-series/802-11ac-Can-the-Wifi-card-be-swapped-out-Y510/...

 

http://www.amazon.ca/s/ref=nb_sb_noss/177-0722279-1715927?url=search-alias%3Daps&field-keywords=Broa...

 

If you called a laptop repair shop near your home you might be able to find a shop that has one of these in stock.

 





Re: CGN3ACSMR or Internet Issue

Jasonkandola
I Plan to Stick Around

i upgraded to the rocket modem and it is very slow youtube take five minutes to load gaming seems to be fine with some disconnects here and there but browsing becomes slow or even stop overall 

Re: CGN3ACSMR or Internet Issue

Is that via wired or wireless?  Can you log into the modem, navigate to the STATUS.... DOCSIS WAN page, copy the downstream and upstream tables and paste them into this thread.  That will let us check the signal levels and signal to noise ratios to see if there is a problem.



Re: CGN3ACSMR or Internet Issue

Jasonkandola
I Plan to Stick Around
Port IDFrequency (MHz)ModulationSignal strength (dBmV)Channel IDSignal noise ratio (dB)
1651000000256QAM-3.1001040.366
2591000000256QAM-2.400140.946
3597000000256QAM-2.800240.366
4603000000256QAM-2.700340.946
5609000000256QAM-2.700440.366
6615000000256QAM-2.900540.366
7621000000256QAM-3.200640.366
8633000000256QAM-3.100740.366
9639000000256QAM-3.000840.366
10645000000256QAM-3.000940.366
11657000000256QAM-3.2001140.366
12663000000256QAM-3.1001240.946
13669000000256QAM-3.2001340.366
14675000000256QAM-3.2001440.366
15681000000256QAM-3.3001540.366
16687000000256QAM-3.4001640.366
17693000000256QAM-3.4001740.366
18699000000256QAM-3.7001840.366
19705000000256QAM-3.7001940.366
20711000000256QAM-3.8002038.983