5 Hotspot Tips & Tricks

Need Help?

That's what we're here for! The goal of the Rogers Community is to help you find answers on everything Rogers. Can't find what you're looking for? Just ask!
cancel
Showing results for 
Search instead for 
Did you mean: 
Reply
Highlighted
Community Manager
Community Manager
Posts: 3,386

5 Hotspot Tips & Tricks

 

 

1. How-to: Connect to a Wi-Fi Printer

 

Who need wires? Not you. Connect your hotspot to a Wi-Fi enabled printer and print from any device connected to your hotspot.

  1. Press the WPS (Wi-Fi Protected Setup) button on top of the hotspot. You’ll see the WPS setup screen come up.
  2. Press the power button to enable WPS.
  3. You’ll have 2 minutes to enable the WPS connection on your printer. The two devices will communicate and establish a connection.

 

 

2. How-to: Lock & Unlock your Hotspot

 

Don’t want someone curious about your hotspot to accidentally disconnecting you. Lock it.

  1. Press and hold the Navigation button for 3 seconds

 

 

3. How-To: Change your Wi-Fi Network Name and PASSPHRASE

 

Want to add a personal touch and perhaps a password you’ll easily remember? You can personalize this and other features through the device’s homepage.

  1. Once you’ve connected to the hotspot, open your browser and navigate to http://swi.hotspot.
  2. Log in using the default admin login name – swiadmin.
  3. Under the Device Security menu you can change your network name and password.

 

 

4. Improve signal strength

 

By placing the hotspot 1 to 2 metres from any electronics that generate RF interference (TVs, microwaves) and by placing near a window, door or drywall walls (keep away from brick, concrete or metal walls).

 

 

5. Extend battery life

 

  1. A) configuring the hotspot to use a smaller Wi-Fi range (in the advanced settings) if you are going to be sitting nearby your hotspot – there’s no need for the signal to need to span farther unless other users around the room are connecting.
  2. B) Connect to the hotspot via a USB cable and disable the Wi-Fi on the hotspot.
  3. C) Limit how many users you have connected to the hotspot.