Français Rogers.com - Welcome
 
WIRELESS HOME PHONE CABLE TV INTERNET HOME MONITORING SUPPORT
Reply

dta not passing through the sound for channel 26

Occasional Contributor
buzzersdad
Posts: 5
Registered: ‎03-24-2012

Just fyi....this is a strange one - I got 3 dta's from rogers.  In one of  them, the sound for channel 26 was mute (regardless of which TV it was attached to). Every other channel was fine.   I replaced it at a Rogers store (good service, no hassle, btw), and it works fine....

Please use plain text.

Re: dta not passing through the sound for channel 26

Advisor
Toff
Posts: 12
Registered: ‎03-02-2012
Hmm so clearly it was specific to that DTA. In the future though, it may not require a swap.

If you do the usual power reset and it still didn't work that would be the next resort, but before you even do the power reset try hitting LANG as that should resolve the issue.

If still no luck after that then swap.
I am a Rogers employee, but my comments are my own and do not necessarily represent the views of Rogers or its affiliates. Je suis un(e) employé(e) de Rogers mais mes commentaires sont les miens et ne reflètent pas nécessairement le point de vue de Rogers ou d’une société de son groupe.
Please use plain text.
© 1995 - 2010 Rogers Communications