Hello all - We moved into our new house about 1.5 years ago. It was wired for Bell so we had Rogers run a new Ignite cable from the utility pole to the external box at the side of our house, and from the box into our home and directly into our modem....
Hello all!I’ve seen multiple suggestions online on the “best” way to setup a third-party mesh system with the Rogers modem, and now I have just a few questions surrounding my current setup.I currently have a TP-Link Deco M4R mesh system connected to ...
Here is my setup.Rogers (500U) —> Hitron CODA-4582U —> Cisco RV130W —> Computer (Wired)Cisco RV130W is a wireless-N VPN router with firewall.Both the Hitron and Cisco are almost at factory defaults. I’ve changed only the passwords and setup the w...
I just had rogers service installed today by a technician after installation I suspect the downstream signal is rather high. I am posting a screenshot of the signal for a second opinion, would appreciate the feedback. Just some additional information...
Hi I have the following setup Rogers (Technicolor CGM4331ROG) setup in bridge Mode pfSense box running 2.6.0-RELEASE with two interfaces (WAN and LAN) Rogers Ignite TV Box Everything seemed to be setup correctly as I was able to get the WAN IP (I...
Hello, So I recently switched from bell to rogers 1gbps legacy after a 1 year hiatus from the company. Coming back I am left to deal with small issues from the CODA modem. Initial setup was great, consistently getting 950/50mbps speeds when wired via...
Hey All, I tried to Bridge to connect my new ASUS Router and it will not detect WAN from the modem. I have tried multiple ports on the modem and even when I do manual setup the web UI and the ASUS lights themselves report no WAN from the modem. I...
So am I the only one that uses scheduled downtime on a Rogers Ignite modem? I have a set of scheduled downtimes set on my son's iPad so he is not on it all the time. It would normally be disabled from 0000-1200 each day. However, I notice that the do...
My old Hitron CODA-4582 was shutting down and dropping wifi. I went through tech support and ended up with a new Hitron CODA-4582. It will not connect to the service. I can hook up the old one and it will connect without issue but wifi not workin...
Hey everyone, So out of nowhere tonight, got hit with some massive download speed & latency issues. If the connection is barely used, latency to google dns, for example, hovers around 40-45 ms. As soon as I start using the connection, with a speedt...
Hello, I have 1GB Ignite internet. Recently it has been going down a lot. I called Rogers, they said everything was fine on their end. After seeing another post which recommends having a look at the downstream and upstream signal data following the...
Hi there. As the title suggests I have the suspicion that a recent firmware update to the CODA wifi/modem units has absolutely destabilized my devices from connecting to 5 GHz reliably.In a nutshell, if any of my devices are on sleep mode for long en...
i haven't been able to speed test higher than 500mbps with a wired connection, I am on a gigabit connection. Downstream Overview Port IDFrequency (MHz)ModulationSignal strength (dBmV)Channel IDSignal noise ratio (dB)1591000000256QAM4.200738.9832...
So, I discovered something today that is pretty concerning. I tried to log into my router today and found that my password did not work. After a number of attempts, I tried "password" and sure enough it worked. At some point, Rogers installed a n...
I have been told by one of my device suppliers the unit does not work because of network congestion. I have the Ignite wifi gateway that supports 2.4 and 5. Rogers support said I will send you a POD to help. I installed it and using the Rogers Hub Ap...
I have a 1gb Internet with rogers but all I'm getting is a little over 200mbps download on WIFI. I tried several tweeks to improve my WIFI download speed but didn't help. I logged into the ignite box to try changing the channel but both the Auto and ...
How does Rogers Ignite determine hostname of a device? I am trying to identify computers in the household and are getting description of devices labelled LAPTOP-0U0F6VG and Laptop-H3Q9569E I can't figure out which is which. Thanks ***Edited Label...
Norton Secure VPN needs access to UDP ports 500 and 4500 to connect to the VPN servers. **Labels Added**
In the past couple weeks I feel like my ignite services have gotten worse. At first, the home phone started cutting out. After that I noticed that my TV would lag occasionally, and websites on computers wouldn't fully load. After looking over some si...
I have not been getting my full speeds lately. Started about last month. We usually get 500mbps down and 20mbps up. Recently our speeds fluctuate a lot and are not very consistent but it is mostly our upload speed. We had really bad issues not long a...
