I recently moved to a new house and when I hooked up my PVR 8300 I noticed I could not pause live TV and I could not play any of my recorded programs. I rebooted and now when I click on list it says the box is full but at the same time it also says I have no recorded programs. Also all my scheduled recordings are gone. I have rebooted a few times now but it nothing happens.
The PVR has basically become a non PVR HD Box.
Is the box toast ? Have I lost all my recorded programs ?
04-02-2012 08:55 AM - last edited on 08-15-2015 03:53 PM by RogersAsif
This has been a problem for many ever since Rogers updated the firmware a year to a year and a half ago. In fact this is only one of many problems created by Rogers with their ill-advised update. We have lost our recorded programs 3 times now. A reboot does not do anything. What we did was to delete all of the programs that appeared in our list but would not play. We have also been able to continue recording new shows. Can you record anything now at all? If not, I would think that you need a new box.
04-02-2012 08:58 AM - last edited on 08-15-2015 03:53 PM by RogersAsif
Can not record anything new - my box was close to full when I disconnected it - it appears the programs are still taking up the space on the drive but they dont appear in the list. I cant record anything new since its showing as full but I cant delete anything either.
I guess I will just have to go to Rogers and replace it with a new box.
04-02-2012 09:22 AM - last edited on 08-15-2015 03:54 PM by RogersAsif
04-02-2012 09:37 AM - last edited on 08-15-2015 03:54 PM by RogersAsif
As a last resort, you could try reformatting the HDD before taking it back.
Last Resort (Reformat). If for some reason you can't get STB to do what you want and you've rebooted it by unplugging it, etc., this is a "last resort" item - say just before taking unit back, you can try reformatting the HDD. The format operation resets all data on the DVR, including all recordings, preferences and scheduled recordings. It is a "factory fresh" reset.
When doing the format procedure, there are times where it won't always "take" and will have to be redone again. The procedure is to get the mail light blinking from the remote control by holding down the pause button. Once blinking do not press anything else except the page down (page -) button on the remote three times while watching the display. The display should say something like HDD-1 and then HDD-2 or HDD-F. Once on the setting you want (typically the third press) leave it alone and put the remote down. In a few minutes, the DVR will reboot and reformat on it's own. Once complete in about 10 to 15 minutes (depending on RDC and FDC signal level quality) the unit will be available to be turned on, but it's best to leave it off and come back at a later time after it has completely downloaded all of the guide data and info.
04-02-2012 10:01 AM - last edited on 08-15-2015 03:54 PM by RogersAsif
The reset worked ! I did lose all my recordings but now I can keep the box - Thanks
I tried the suggestion hold pause button than do page down 3 times. I am getting a message E-002. Any idea how I could resolve this error.
05-07-2013 08:36 PM - last edited on 08-15-2015 03:55 PM by RogersAsif
well, well, well.....................reformatting worked, now I don't have to run to rogers and spend $500.00 or rent to own the new nextbox
11-27-2013 06:03 PM - last edited on 08-15-2015 03:55 PM by RogersAsif
To saws :
You may have pressed the wrong key, please reboot box by unpluging and pluging back in the power cord to the box and then try the below sequesnce again!
Lastly box will show black CISCO screen and then LOADING DATA screen. Once complete your picture should appear, proceed with testing PVR functions!
We've had our PVR for about a year and a half, and it has steadily grown a collection of recordings since then; mostly kids programs that our boys like to watch multiple times, plus a host of more recent recordings from the past few weeks we haven't had time to catch up on yet.
This morning, we found the PVR controls stuck and unresponsive. We rebooted the box, but it now shows our dozens of recordings are gone, and it says the box is 0% full. Our recording schedule is still there, but the recorded list is empty.
Anyone have any immediate thoughts on a "magic" sequence to get the box to find the recordings again?
Tables will be broken, ladders climbed, chairs bent, and some careers will never be the same. Don't miss RAW Superstars Roman Reigns, Sasha Banks, Alexa Bliss, Seth Rollins, Finn Balor, Braun Strowman and more!