07-11-2011 10:12 AM - last edited on 03-23-2015 01:35 PM by RogersJermaine
Hi, my uncle is having trouble logging in to this page. He types cusadmin and "password" for password, but it just goes back to the login page, saying again, "please type in username and password". He has an SMC gateway from Rogers.
What do you suggest he does? Thanks.
I don't own the SMC D3GN, so cannot speak from personal experience. However, the following URL refers to two different user ID's and their passwords:
Begin there, and try both user ID's. Secondly, you could suggest that your uncle push the "reset" button on the device as per the SMC documentation. Perhaps that will restore the factory default passwords.
The page listed above has (I believe) the correct id/password and instructions for setting this 'router' back to dumb modem mode, although Rogers should be able to do this for you.
07-27-2011 08:57 PM - edited 07-27-2011 09:00 PM
Restoring Factory Defaults
from page 14 of the user manual http://www.smc.com/files/AJ/SMCD3GN-UserManual_Rogers.pdf
The Reset button on the back panel can be used to return the device to its factory default settings. As a result, any changes made to your Gateway’s default settings will be lost. If you do not have physical access to the device, you can use the GUI to either power cycle the device (See “Using the Reboot Menu to Reboot Your Gateway” on page 85.) or return your Gateway to its factory default settings (see “Using the Reboot Menu to Reboot Your Gateway” on page 85.
The following procedure describes how to use the Reset button to power cycle your Gateway and return it to its original factory default settings.
1. Leave power plugged into your Gateway.
2. Find the Reset button on the back panel, then press and hold it for at least 10 seconds.
3. Release the Reset button.
Apparently, an alternative to pressing the reset button for 10 seconds is using the "Home Networking Easy Set-up CD" that you (may have) received with your modem (CD only supports Windows Vista and XP) http://fileplug.com/index.php?topic=68.0
Whatever option you use, resetting the modem will erase ALL settings previously made. In addition to restoring the default passwords, you'll get full access to the GUI and menus, wireless will be enabled, all routing functions will return and so on.
When logging in to the modem GUI to make changes, it's best to use a physical connection (Ethernet LAN cable) between your computer and the modem.
http://192.168.0.1 should get you to the login screen. Use customer admin user cusadmin with a password of password
If you are knowledgeable about networking, the full administrative user rogcesadmin (be careful!) Google for the latest password http://www.google.ca/search?hl=en&q=rogcesadmin+password
You THEN have to go through the process of securing your network (turn off WiFi if you don't use it, change your passwords for your router, and so on). Again, if you're not familiar with networking and you have the "Home Networking Easy Set-up CD", the CD will walk you through the process.